Water Proofing Products

Shali Urethane LM

Product Details:
  • Type: Waterproof Elastomeric Coatings

Our range of waterproofing system is competitive and includesShali Urethane LM been largely demanded and appreciated followed by its smooth performance. We are also dedicatedly engaged in giving special care to the quality aspects of our offered range keeping in mind clients' satisfaction.


Features:


  • Excellent adhesion to concrete
  • Meant for water proofing
  • Durable

 

Specifications:

ApplicationRoller/ airless sparySolid Content %> 85 ± 2
Drying Time, Hrs24Tensile N/mm2 to 5
DFT, micron> 1000Elongation, %> 500
Water Absorption %< 0.5Hardness Shore D, number40 – 55
UV ResistanceGoodWeight loss, %15± 2

Applications:

  • Slopes, roofs, walls and any complex geometrical areas.
  • Base slab waterproofing prior to tiling / paving in fountain, kitchen, bathrooms, pools, retaining walls.
  • Terrace walls, tunnels, planters and other areas where a seamless, elastomeric waterproofing is required.

Advantages:

  • UV resistant
  • Easy to apply
  • Easily repairable
  • Exhibits good waterproofing character
  • Excellent adhesion to concrete
  • Barrier coat against water ingress

Application Methodology:

  • Clean surface by oil free compressed air, sandblasting, wire brushes or other mechanical means to ensure removal of all rust, oil, grease, dirt, or any other loose particle prior to

Application of primer:

  • Ensure that the surface is moisture free before application.
  • Ensure that the substrate temperature is in the range of 8– 40 ºC.
  • Ensure that the humidity level at the time of application is 55 % max.

    Apply:

    • Shali Urethane LM @ 1.2 Kg / Sq.M for 1000 microns per coat by roller / airless spray and allow it to dry for 24 Hrs. Cleaning & Maintenance Clean all tools immediately after use with xylene. Do not allow it to harden. Health & Safety
    • Do not allow Shali Urethane LM to come in contact with the skin and eyes, or be swallowed.
    • Wear suitable protective clothing, gloves and eye

    protection:

    • In case of contact with skin, rinse with plenty of clean water, then cleanse with soap and water. Do not use solvent to clean the contacted area.
    • In case of contact with eyes, rinse immediately with plenty of clean water and seek medical advice.
    • If swallowed seek medical attention immediately do not induce vomiting. In case of fire use dry chemical or carbon dioxide extinguishers.

    Packing:

    • Available in 25 Kgs drums.

    Storage:

    • Store in a cool dry place under shed away from heat
    • Shelf Life 12 months in original unopened sealed conditions.

    Waterproofing Chemicals

    We are proficient in designing and manufacturing a range of Waterproofing Chemicals. These are manufactured using optimum quality raw-material and sophisticated technology, these are products are at par with the defined parameters of the industry. These chemicals are widely demanded in the international market for its high efficiency and long lasting results.

    Features:

    • High performance
    • Long lasting service
    • Smooth-finish
    • Excellent result

    Waterproofing Insulation

    Our range of waterproofing membranes has earned us huge profits including Waterproofing Insulation. Our product is widely used for thermal insulation, floor insulation and perimeter insulation. The membrane is water proof, anti-corrosive, long lasting, thermally insulated and also eliminates noise. It is light in weight with high compressive strength and is resistant to impact.

    Features:

    • Provides thermal insulation
    • Resistant to impact
    Looking for Water Proofing Products ?
    Share Us:
    © Mahavir Chemical Industries
    Desktop Site Back to top